DOOM 30th Anniversary Lithograph (Studio Art)

DOOM 30th Anniversary Lithograph
Celebrate the legacy of DOOM with the exclusive DOOM 30th Anniversary Lithograph. This collector’s piece commemorates three decades of demon-slaying action, encapsulating the essence of the iconic franchise in a stunning 18 x 24-inch lithograph.
FEATURES
Size: 18 x 24 in (45.72 x 60.96 cm)
Paper: 100# White Chorus Art Gloss Cover
Legal printed on the back of the lithograph
Full bleed
Product color may vary from the images shown due to monitor display variance.
Please Note: This lithograph is shipped rolled, in a tube, to reduce the chance for damage during shipping. See bottom of the description for options to flatten your lithograph.
FLATTENING YOUR LITHOGRAPH
To flatten your lithograph, the following measures may be taken.
Option 1
Unroll your lithograph and lay it between 2 boards that are larger than the print. Make sure the boards are clean or sandwich your print between tissue paper. Place heavy items evenly across the top of the boards. Leave as long needed to flatten the print.
Option 2
You can lightly iron your lithograph on a flat and heat resistant surface. Set your iron to the lightest setting first. You must place either a pressing cloth or towel between the iron and the print. Otherwise, you will burn your print. It is advised that you have the print face down when ironing. Gently press your iron on the cloth and print, moving back and forth only on the cloth until the area is flat. Do this across the entire print. If you feel the iron is not hot enough gently increase the temperature until the desired effect is achieved.
Option 3
Take your print to a professional framing service and have them frame or mount it on a board.
The Bethesda Gear Store will not be held liable if you damage your print using the above methods. These are merely options to help you get the most out of your lithograph.